Stickers reproduced by Charles Vyse ------------------------------------ There are 2 files. Print out 1 of them and then put the sheet of paper back in the printer, in the same position as it printed out the first time and print the second file. You will now have the complete set. The 'miofiltre' sticker goes on the intake trumpet of the air cleaner. There are 2 versions - choose the version that is the more golden colour as rendered by your printer. The other 3 stickers from left to right are: 1. The Total oil sticker. This goes on the rocker box neck, just underneath the oil filler. 2. The Antigel anti-freeze sticker. This goes on the top of the radiator to the right of the filler cap. 3. The Total LHM sticker. This goes on the top of the hydraulic reservoir - clean all the oil film off first, otherwise it will not stick. I found the best results come from printing with an Inkjet printer onto photo quality Inkjet paper. Then either cover the printed page with transparent film, OR spray the printed page with clear fixative which you can get from any artists supply shop. I would imagine that any clear translucent spray will work. If you don't do this, oil film present in the engine bay will be absorbed by the paper and the decals will quickly degrade. To stick the decals on, tape double sides sellotape to the back of the sheet, before you knife the stickers out. You can buy adhesive paper, but I found the paper quality is poor and it doesn't print out the colours very well.